Excellent FCP_FSM_AN-7.2 Updated 2026 Dumps With 100% Exam Passing Guarantee
Best way to practice test for Fortinet FCP_FSM_AN-7.2
Fortinet FCP_FSM_AN-7.2 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 20
Refer to the exhibit.
If a rule containing the automation policy shown in the exhibit triggers, what will happen?
- A. Associated source IP addresses will be blocked on all FortiGate firewalls.
- B. Associated source IP addresses will be blocked on devices in the Network CMDB group.
- C. Associated source IP addresses will be blocked on devices in the Aviation organization.
- D. Associated source IP addresses will be blocked on two FortiGate firewalls.
Answer: D
Explanation:
The automation policy is configured to run a remediation script named "Fortinet FortiOS - Block Source IP FortiOS via API". It specifies enforcement on two FortiGate devices: FortiGate508 and FortiGate90D. Therefore, associated source IP addresses will be blocked on those two FortiGate firewalls only.
NEW QUESTION # 21
Refer to the exhibit.
An analyst is trying to identify an issue using an expression based on the Expression Builder settings shown in the exhibit; however, the error message shown in the exhibit indicates that the expression is invalid.
What is the correct syntax to create an expression that generates a total count of matched events?
- A. Matched Events COUNT()
- B. (COUNT) Matched Events
- C. COUNT(Matched Events)
- D. Matched Events (COUNT)
Answer: C
Explanation:
The correct syntax is COUNT(Matched Events) - with proper capitalization and spacing - to generate a total count of matched events. The error in the exhibit likely stems from a formatting issue (e.g., lowercase count() or incorrect spacing), not the logical structure of the expression.
NEW QUESTION # 22
How does FortiSIEM update the incident table if a performance rule triggers repeatedly?
- A. FortiSIEM generates a new incident each time the rule triggers, and updates the First Seen and Last Seen timestamps.
- B. FortiSIEM updates the Incident Count value and Last Seen timestamp.
- C. FortiSIEM changes the incident status to Repeated, and updates the Last Seen timestamp.
- D. FortiSIEM generates a new incident based on the Rule Frequency value, and updates the First Seen and Last Seen timestamps.
Answer: B
Explanation:
When a performance rule triggers repeatedly, FortiSIEM updates the existing incident by incrementing the Incident Count and refreshing the Last Seen timestamp. This avoids flooding the incident table with duplicates while still tracking repeated occurrences.
NEW QUESTION # 23
Refer to the exhibit.
An analyst is trying to generate an incident with a title that includes the Source IP, Destination IP, User, and Destination Host Name. They are unable to add a Destination Host Name as an incident attribute.
What must be changed to allow the analyst to select Destination Host Name as an attribute?
- A. The Destination Host Name must be added as an Event type in the FortiSIEM.
- B. The Destination Host Name must be selected as a Triggered Attribute.
- C. The Destination IP Event Attribute must be removed.
- D. The Destination Host Name must be set as an aggregate item in a subpattern.
Answer: B
Explanation:
For an attribute like Destination Host Name to be used in the incident title, it must first be included in the Triggered Attributes list. Only attributes listed there are available for substitution in the title template (e.g., $destIpAddr, $srcIpAddr).
NEW QUESTION # 24
Refer to the exhibit.
What is the Group: FortiSIEM Analysts value referring to?
- A. Windows Active Directory user group
- B. CMDB user group
- C. FortiSIEM organization group
- D. LDAP user group
Answer: B
Explanation:
In FortiSIEM, the value Group: FortiSIEM Analysts under the User attribute refers to a CMDB user group. These groups are defined within FortiSIEM's CMDB and used to logically organize users for analytics, correlation rules, and reporting.
NEW QUESTION # 25
Which statement about thresholds is true?
- A. FortiSIEM uses only device thresholds for security metrics.
- B. FortiSIEM uses global and per device thresholds for performance metrics.
- C. FortiSIEM uses fixed, hardcoded global and device thresholds for all performance metrics.
- D. FortiSIEM uses only global thresholds for performance metrics.
Answer: B
Explanation:
FortiSIEM evaluates performance metrics against both global thresholds, which apply system-wide, and per-device thresholds, which can be customized for individual devices. This dual approach allows flexibility in monitoring while ensuring consistent baseline alerting.
NEW QUESTION # 26
Refer to the exhibit.
What will happen when a device being analyzed by the machine learning configuration shown in the exhibit has a consistently high memory utilization?
- A. FortiSIEM will update the model with a higher memory utilization average value.
- B. FortiSIEM will lower the CPU utilization trigger requirement for CPU utilization.
- C. FortiSIEM will trigger an incident for high memory utilization.
- D. FortiSIEM will update the regression tables for memory utilization, and average sent and received bytes.
Answer: A
Explanation:
In the configuration shown, FortiSIEM uses Memory Util, Sent Bytes, and Received Bytes as input features to predict CPU Utilization via a regression model. If a device shows consistently high memory utilization, the model will incorporate that into its training data and update itself with a higher average value for memory utilization, influencing future CPU utilization predictions.
NEW QUESTION # 27
Which analytics search can be used to apply a user and entity behavior analytics (UEBA) tag to an event for a failed login by the user JSmith?
- A. User = smith
- B. Username NOT END WITH jsmith
- C. Username CONTAIN smit
- D. User IS jsmith
Answer: D
Explanation:
The correct syntax to match an exact username in FortiSIEM analytics search is User IS jsmith. This ensures that the UEBA tag is applied only when the event is specifically tied to the user "jsmith", which is required for accurate behavioral analytics.
NEW QUESTION # 28
Refer to the exhibit.
If you group the events by User, Source IP, and Count attributes, how many results will FortiSIEM display?
- A. Six
- B. Five
- C. Three
- D. Two
- E. Four
Answer: A
Explanation:
Grouping by User, Source IP, and Count means that each unique combination of those three attributes will be treated as a separate result. In the table, all six rows have distinct combinations of User, Source IP, and Count - so FortiSIEM will display 6 results.
NEW QUESTION # 29
Refer to the exhibit.
A FortiSIEM device is receiving syslog events from a FortiGate firewall. The FortiSIEM analyst is trying to search the raw event logs for the last two hours that contain the keyword "udp". However, they are getting no results from the search, which they know should be available. Based on the filter shown in the exhibit, why are there no search results?
- A. The keyword is case sensitive. Instead of typing udp in the Value field, the analyst should type UDP.
- B. The analyst selected AND in the Next column. This is the wrong Boolean operator.
- C. The analyst selected = in the Operator column. That is the wrong operator.
- D. The Time Range value should be set to Real-Time.
Answer: C
Explanation:
The operator is set to "=", which performs an exact match on the entire raw event log, not a substring search. To find logs that contain the keyword "udp", the analyst should use the CONTAIN operator instead. This will return all logs where "udp" appears anywhere in the raw log message.
NEW QUESTION # 30
Refer to the exhibit.
Which two lookup types can you reference as the subquery in a nested analytics query? (Choose two.)
- A. Event Query
- B. CMDB Query
- C. LDAP Query
- D. SNMP Query
Answer: A,D
Explanation:
In FortiSIEM nested analytics queries, you can reference both CMDB Queries and Event Queries as subqueries. These allow correlation between CMDB data and event data for advanced detection use cases.
NEW QUESTION # 31
Refer to the exhibit.
What happens when an analyst clears an incident generated by a rule containing the automation policy shown in the exhibit?
- A. A notification is sent to the SOC manager dashboard.
- B. The remediation script is run.
- C. No notification is sent.
- D. An email is sent to the SOC manager.
Answer: C
Explanation:
The automation policy has the option "Do not notify when an incident is cleared manually" enabled. Therefore, when an analyst manually clears an incident, no notification or automation action is triggered.
NEW QUESTION # 32
Refer to the exhibit.
An analyst is troubleshooting the rule shown in the exhibit. It is not generating any incidents, but the filter parameters are generating events on the Analytics tab.
What is wrong with the rule conditions?
- A. The Group By attributes restricts which events are counted.
- B. The Aggregate attribute is too restrictive.
- C. The Event Type refers to a CMDB lookup and should be an Event lookup.
- D. The Destination Host Name value is not fully qualified.
Answer: A
Explanation:
The Group By attributes - Destination IP and User - cause the aggregation (COUNT(Source IP) >= 2) to apply within each unique combination of those groupings. This restricts the count calculation and can prevent the rule from triggering incidents, even if matching events exist in the Analytics tab.
NEW QUESTION # 33
Refer to the exhibit.
If you group the events by User and Count attributes, how many results will FortiSIEM display?
- A. Five
- B. Six
- C. Three
- D. Two
- E. One
Answer: A
Explanation:
Grouping by User and Count yields five unique pairs: (Mike,4), (Bob,3), (Alice,2), (Bob,6), (Mike,5).
NEW QUESTION # 34
......
FCP - FortiSIEM 7.2 Analyst Certification Sample Questions and Practice Exam: https://passleader.realexamfree.com/FCP_FSM_AN-7.2-real-exam-dumps.html
