Quality 2V0-21.23 PDF Dumps - 2V0-21.23 Exam Questions
Most UptoDate VMware 2V0-21.23 Exam Dumps PDF 2024
VMware 2V0-21.23 exam covers a range of topics, including vSphere architecture and technologies, installation and configuration of vSphere components, virtual machine management, data center management, and network management. 2V0-21.23 exam is intended for IT professionals who have experience working with vSphere environments and want to enhance their skills and knowledge.
VMware 2V0-21.23 exam is a rigorous test that requires candidates to demonstrate their proficiency in managing and configuring vSphere environments. 2V0-21.23 exam is designed to test the skills and knowledge required to manage complex virtualized environments, and successful candidates will be able to demonstrate their ability to configure virtual machines, manage data centers, and troubleshoot common vSphere issues.
NEW QUESTION # 24
An administrator is tasked with configuring remote direct memory access (RDMA) over Converged Ethernet v2 (RoCE v2).
Which two types of adapters must the administrator configure? (Choose two.)
- A. RDMA network adapter
- B. Paravirtual RDMA adapter
- C. Software NVMe over RDMA storage adapter
- D. Software iSCSi adapter
- E. Fibre Channel over Ethernet (FCoE) adapter
Answer: A,C
Explanation:
ESXi 7 and later supports RoCE v2 technology, which enables RDMA over an Ethernet network. Hosts use an RDMA network adapter installed on the host and a software NVMe over RDMA storage adapter.
https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-storage/GUID-F4B42510-9E6D-4446-816A-5012866E0038.html
NEW QUESTION # 25
An administrator remotely deploys VMware ESXi using an out of band management connection and now needs to complete the configuration of the management network so that the host is accessible through the vSphere Host Client.
The following information has been provided to complete the configuration:
* Host FQDN esxi01corp.local
* Management VLAN ID: 10 DHCP: No
* Management IP Address: 172.16.10.101/24
* Management IP Gateway: 172.16.10.1
. Corporate DNS Servers: 172 16.10.5, 172.16.10..6
* DNS Domain: corp.local
In addition, all host configurations must also meet the following requirements:
* The management network must use only IPv4 network protocols.
* The management network must be fault tolerant
Which four high level tasks should the administrator complete in the Direct Console User Interface (DCUI) in order to meet the requirements and successfully log into the vSphere Host Client? (Choose four.)
- A. Restore the original Management vSphere Standard Switch.
- B. Disable IPv6 for the VMware ESXi Management Network
- C. Configure at least two network adapters for the VMware ESXi Management Network
- D. Update the VMware ESXi Management Network IPv4 configuration to use a static IPv4 address
- E. Set the value of the VMware ESXi Management Network VLAN ID to 10
- F. Update the VMware ESXi Management Network DNS configuration to use the corporate DNS servers for ' names resolution
- G. Create a DNS A Record for the VMware ESXi host on the corporate DNS servers
Answer: C,D,E,G
NEW QUESTION # 26
An administrator is tasked with configuring remote direct memory access (RDMA) over Converged Ethernet v2 (RoCE v2).
Which two types of adapters must the administrator configure? (Choose two.)
- A. RDMA network adapter
- B. Paravirtual RDMA adapter
- C. Software NVMe over RDMA storage adapter
- D. Software iSCSi adapter
- E. Fibre Channel over Ethernet (FCoE) adapter
Answer: A,C
Explanation:
Explanation
ESXi 7 and later supports RoCE v2 technology, which enables RDMA over an Ethernet network. Hosts use an RDMA network adapter installed on the host and a software NVMe over RDMA storage adapter.
https://docs.vmware.com/en/VMware-vSphere/8.0/vsphere-storage/GUID-F4B42510-9E6D-4446-816A-501286
NEW QUESTION # 27
Refer to the exhibit.
After updating a predefined alarm on VMware vCenter, an administrator enables email notifications as shown in the attached alarm; however, notifications are NOT being sent.
Where must the mail server settings be configured by the administrator to resolve this issue?
- A. In the alarm rule definitions
- B. In the ESXi host system config
- C. In the vCenter settings in the vSphere Client
- D. in the vCenter Management Interface
Answer: C
Explanation:
Explanation
Option C is correct because it allows the administrator to configure the mail server settings in the vCenter settings in the vSphere Client, which are required for sending email notifications for alarms. Option A is incorrect because it configures the mail server settings on an ESXi host system, which are not used for sending email notifications for alarms. Option B is incorrect because it configures the alarm rule definitions, which are already enabled in the exhibit. Option D is incorrect because it configures the vCenter Management Interface, which is not used for sending email notifications for alarms. References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.monitoring.doc/GUID-A2A4371A-B88
NEW QUESTION # 28
An administrator has mapped three vSphere zones to three vSphere clusters.
Which two statements are true for this vSphere with Tanzu zonal Supervisor enablement? (Choose two.)
- A. Three Supervisors will be created in Linked Mode.
- B. One Supervisor will be created in a specific zone.
- C. Individual vSphere Namespaces will be spread across all zones.
- D. One Supervisor will be created across all zones.
- E. Individual vSphere Namespaces will be placed into a specific zone.
Answer: C,D
Explanation:
For a vSphere with Tanzu zonal Supervisor enablement where three vSphere zones are mapped to three vSphere clusters, the following two statements are true:
B) One Supervisor will be created across all zones. In a three-zone deployment, all three vSphere clusters become one Supervisor.
E) Individual vSphere Namespaces will be spread across all zones. You can distribute the nodes of your Tanzu Kubernetes Grid clusters across all three vSphere zones, thus providing HA for your Kubernetes workloads at a vSphere cluster level.
NEW QUESTION # 29
An administrator is tasked with looking into the disaster recovery (DR) options for a software-defined data center (SDDC).
The following requirements must be met:
* All virtual machines (VMs) must be protected to a secondary site.
* The source VMs must remain online until the failover.
* When failing over to the secondary site, application downtime is allowed
* The DR failover must be managed from the vSphere Client.
* Costs must remain as low as possible.
How can the administrator accomplish this task?
- A. Configure VMware Site Recovery Manager and combine it with array-based storage replication.
- B. Configure VMware a Site Recovery Manager and combine it with vSphere Replication.
- C. Configure VMware Cloud Disaster Recovery (VCDR) and combine it with array-based storage replication
- D. Configure a subscribed content library on the secondary site.
Answer: B
Explanation:
https://blogs.vmware.com/virtualblocks/2017/11/29/vsr-technicaloverview/
NEW QUESTION # 30
During the staging of a patch on a vCenter Server Appliance, an error was encountered and the process stopped. An administrator resolved the root cause and is ready to continue with the staging of the patch.
From the vCenter Management Interface, which action should the administrator take to continue the process from the point at which the error occurred?
- A. Use the Unstage option to restart the staging.
- B. Use the Stage Only option to restart the staging.
- C. Use the Resume option to resume the staging.
- D. Use the Stage and Install option to resume the staging.
Answer: C
Explanation:
Explanation
docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vcenter.upgrade.doc/GUID-FF533442-66F0-4797-976
NEW QUESTION # 31
An administrator is tasked with implementing a backup solution capable of backing up the Su-pervisor cluster, vSphere Pods, and persistent volumes.
Which two solutions must be used to meet this requirement? (Choose two.)
- A. Standalone Velero and Restic
- B. vSphere Host Client
- C. Velero Plugin for vSphere
- D. VMware vCenter
- E. NSX-T Manager
Answer: A,C
Explanation:
https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-9816E07A-466C-451D-A43B-D415B2FAB7D6.html
NEW QUESTION # 32
An administrator Is performing maintenance activities and discovers that a Virtual Machine File System (VMFS) datastore has a lot more used capacity than expected. The datastore contains 10 virtual machines (VMs) and, when the administrator reviews the contents of the associated datastore, discovers that five- virtual machines have a snapshot file (-delta.vmdk flies) that has not been modified In over 12 months. The administrator chei kfl the Snapshot Manager within the vSphere Client and confirms that there are no snapshots visible.
Which task should the administrator complete on the virtual machines to free up datastore space?
- A. Delete all snapshots for each VM.
- B. Storage vMotion each VM to another datastore.
- C. Consolidate the snapshots for each VM.
- D. Inflate the disk files for each VM.
Answer: C
Explanation:
Explanation
Consolidating snapshots for each VM will merge any snapshot files that are not associated with a snapshot in Snapshot Manager into the base disk file and free up datastore space.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-53F65726-A23B The presence of redundant delta disks can adversely affect the virtual machine performance. You can combine such disks without violating a data dependency. After consolidation, redundant disks are removed, which improves the virtual machine performance and saves storage space.
NEW QUESTION # 33
An administrator is tasked with configuring an appropriate Single Sign-On (SSO) solution for VMware vCenter based on the following criteria:
* The solution should support the creation of Enhanced Link Mode groups.
* All user accounts are stored within a single Active Directory domain and the solution must support only this Active Directory domain as the identity source.
* All user account password and account lockout policies must be managed within the Active Directory domain.
* The solution should support token-based authentication.
Which SSO solution should the administrator choose based on the criteria?
- A. vCenter Single Sign-On with Active Directory over LDAP as the identity source
- B. vCenter Identity Provider Federation with Active Directory Federation Services as the identity provider
- C. vCenter Single Sign-On with Active Directory (Windows Integrated Authentication) as the identity source
- D. vCenter Identity Provider Federation with Active Directory over LDAP as the identity provider
Answer: C
Explanation:
Explanation
Option C is correct because it indicates that vCenter Single Sign-On with Active Directory (Windows Integrated Authentication) as the identity source is the best SSO solution for VMware vCenter based on the criteria, as this solution supports Enhanced Link Mode groups, supports only one Active Directory domain as the identity source, delegates password and account lockout policies to Active Directory, and supports token-based authentication. Option A is incorrect because vCenter Identity Provider Federation with Active Directory Federation Services as the identity provider is not necessary for a single Active Directory domain scenario and may introduce additional complexity and overhead. Option B is incorrect because vCenter Single Sign-On with Active Directory over LDAP as the identity source does not support token-based authentication and may require additional configuration for password and account lockout policies. Option D is incorrect because vCenter Identity Provider Federation with Active Directory over LDAP as the identity provider does not support token-based authentication and may introduce additional complexity and overhead. References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vcenter.install.doc/GUID-A2A4371A-B888-404
NEW QUESTION # 34
A VMkernel port is labelled PROD01 and uses the default TCP/IP stack. Currently, this VMkernel port is configured for supporting live virtual machine (VM) migrations.
Which configuration change should the administrator make to isolate live VM migration traffic from other network traffic?
- A. Create a new VMkernel port and set the TCP/IP stack to provisioning.
- B. Remove PROD01 and create a new VMkernel port and set the TCP/IP stack to vSphere vMotion.
- C. Remove PROD01 and create a new VMkernel port with the TCP/IP stack set to provisioning.
- D. Modify PROD01 by changing the TCP/IP stack to vSphere vMotion.
Answer: D
Explanation:
Explanation
The configuration change that should be made to isolate live VM migration traffic from other network traffic is to modify PROD01 by changing the TCP/IP stack to vSphere vMotion, which allows dedicating a separate stack for vMotion traffic and disabling it from the default TCP/IP stack.
References: https://hyperhci.com/2019/11/20/vmkernel-port-default-stack-vs-vmotion-tcp-ip-stack/
https://vstellar.com/2017/09/configuring-and-managing-vmkernel-tcpip-stacks/
NEW QUESTION # 35
f\n administrator needs to provide encryption for workloads within an existing vSphere cluster. The following requirements must be met:
* Workloads should be encrypted at rest.
* Encrypted workloads must automatically be encrypted during transit.
* Encryption should not require any specific hardware.
What should the administrator configure to meet these requirements?
- A. VM Encryption
- B. Host Encryption
- C. Unified Extensible Firmware Interface (UEFI) Secure Boot
- D. Encrypted vSphere vMotion
Answer: A
Explanation:
Explanation
The feature that should be configured to provide encryption for workloads within an existing vSphere cluster without requiring any specific hardware is VM Encryption, which allows encrypting VMs at rest and during vMotion.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.security.doc/GUID-F8F105EC-A6EA-4
NEW QUESTION # 36
Following a merger with another company, an administrator is tasked with configuring an identity source for VMware vCenter so that all vSphere administrators can authenticate using their existing Active Directory accounts. Each company has user accounts in their own Active Directory forests.
The following additional information has been provided:
* The corporate policy states that only Windows-based machine accounts are allowed in Active Directory.
Which action should the administrator take to configure vCenter Single Sign-On (SSO) to meet this requirement?
- A. Configure SSO to use Active Directory over LDAP as the identity source.
- B. Join the vCenter Server Appliance to the LDAP domain.
- C. Configure SSO to use OpenLDAP as the identity source.
- D. Configure SSO to use Active Directory (Integrated Windows Authentication) as the identity source.
Answer: D
Explanation:
Explanation
The action that should be taken to configure SSO to use existing Active Directory accounts without creating machine accounts in Active Directory is to configure SSO to use Active Directory (Integrated Windows Authentication) as the identity source, which allows using Windows session authentication credentials.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.security.doc/GUID-F8F105EC-A6EA-4
NEW QUESTION # 37
An administrator is tasked with applying updates to a vSphere cluster running vSAN using vSphere Lifecycle Manager.
Downtime to the ESXI hosts must be minimal while the work Is completed.
The administrator has already completed the following steps and no errors have been returned:
* Downloaded all applicable software and created a new Image
* Attached the new Image to the cluster and run a compliance check against the Image for the cluster
* Ran a remediation pre-check for the cluster
Which two series of steps should the administrator perform to start the remediation of the cluster using the new image? (Choose two.)
- A. 1. Leave all ESXI hosts in the cluster operational.
2. Use the Stage All option in vSphere Lifecycle Manager to stage the required software onto all ESXI hosts one at a time. - B. 1. Use the Remediate option in vSphere Lifecycle Manager to remediate all of the ESXI hosts in the cluster in parallel.
2. Allow vSphere Lifecycle Manager to automatically control maintenance mode on the ESXI hosts. - C. 1. Place each of the ESXI hosts into maintenance mode manually.
2. Use the Stage option in vSphere Lifecycle Manager to stage the required software on all ESXi hosts one at a time. - D. 1. Leave all ESXI hosts in the cluster operational
2. Use the Stage All option in vSphere Lifecycle Manager to stage the required software onto all ESXI hosts in the cluster In parallel. - E. 1. Use the Remediate Option In vSphere Lifecycle Manager to remediate all of the ESXI hosts In the cluster In sequence.
2. Allow vSphere Lifecycle Manager to automatically control maintenance mode on the ESXI hoy
Answer: B,D
Explanation:
Option A and D are correct because they allow vSphere Lifecycle Manager to automatically control maintenance mode on the ESXi hosts and remediate them in parallel or in sequence. Option B and C are incorrect because they require manual intervention to place the hosts into maintenance mode or to stage the software on each host, which is not efficient or minimal downtime. Reference: https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere-lifecycle-manager.doc/GUID-9F9E3F8C-0E2B-4B6A-8C5C-3F8E5F6B4E9D.html
NEW QUESTION # 38
An administrator creates a new corporate virtual machine (VM) template every month to include all of the latest patches. The administrator needs to ensure that the new VM template is synchronized from the primary data center site (London) to two secondary data center sites (Tokyo and New York). The administrator is aware that datastore space is limited within the secondary data center sites. The administrator needs to ensure that the VM template is available in the secondary sites the first time a new virtual machine is requested.
Which four steps should the administrator take to meet these requirements? (Choose four.)
- A. Create a new published content library in each secondary site.
- B. Configure the subscribed content library to download content when needed.
- C. Add the virtual machine template to the published content library.
- D. Create a new subscribed content library in each secondary site.
- E. Configure each subscribed content library to download content immediately.
- F. Create a new published content library at the primary site.
- G. Add the virtual machine template to the subscribed content library.
Answer: B,C,D,F
Explanation:
Explanation
To meet the requirements of synchronizing and protecting images and templates with limited datastore space, the administrator needs to create a new published content library at the primary site, which makes it available for subscription by other vCenter Server instances; create a new subscribed content library in each secondary site, which allows accessing content from a published content library; configure the subscribed content library to download content when needed, which saves datastore space by only downloading content on demand; and add the virtual machine template to the published content library, which makes it available for other hosts to use.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.vm_admin.doc/GUID-FBEED81C-F9D
NEW QUESTION # 39
What is the minimum network throughput in Gb/s for vSAN using the Express Storage Architecture (ESA)?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
https://core.vmware.com/resource/vmware-vsan-design-guide#:~:text=Summary%20of%20Network%20Design%20Considerations,are%20recommended%20for%20best%20performance.
NEW QUESTION # 40
A vSphere cluster has the following configuration:
* Virtual machines (VMs) are running Production and Test workloads
* vSphere Distributed Resource Scheduler (DRS) is enabled
* There are no resource pools in the cluster
Performance monitoring data shows that the Production workload VMs are not receiving their fully allocated memory when the vSphere cluster is fully utilized.
A combination of which two steps could the administrator perform to ensure that the Production VMs are always guaranteed the full allocation of memory? (Choose two.)
- A. Create a sibling resource pool for each of the Production and Test VMs.
- B. Create a child resource pool for the Test VMs.
- C. Assign a custom memory share value to the resource pool containing the Production VMs.
- D. Create a parent resource pool for the Production VMs.
- E. Assign a memory reservation value to the resource pool containing the Production VMs.
Answer: B,E
Explanation:
Explanation
Option B and E are correct because they allow the administrator to create resource pools for the Production and Test VMs and assign memory reservation values to the Production resource pool, which guarantees that the Production VMs are always allocated their full memory. Option A is incorrect because assigning a custom memory share value to the Production resource pool does not guarantee that the Production VMs are always allocated their full memory, but only gives them higher priority when there is contention. Option C is incorrect because creating a parent resource pool for the Production VMs does not change anything unless there are child resource pools under it. Option D is incorrect because creating a sibling resource pool for each of the Production and Test VMs does not change anything unless there are different resource settings for each pool.
References:
https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.resmgmt.doc/GUID-60077B40-66FF-4
NEW QUESTION # 41
An administrator is tasked with migrating a single virtual machine (VM) from an existing VMware vCenter to a secure environment where corporate security policy requires that all VMs be encrypted. The secure environment consists of a dedicated vCenter instance with a 4-node vSphere cluster and already contains a number of encrypted VMs.
Which two steps must the administrator take to ensure the migration is a success? (Choose two.)
- A. Ensure that the source and destination vCenter instances share the same Key Management Server (KMS).
- B. Ensure that Encrypted vMotion Is turned off for the VM.
- C. Ensure that the source and destination vCenter Servers have a different Key Management Server (KMS).
- D. Ensure that the VM is powered off before attempting the migration.
- E. Ensure that the VM is encrypted before attempting the migration.
Answer: A,E
Explanation:
To ensure a successful migration of an encrypted VM to a secure environment, the administrator needs to ensure that the source and destination vCenter instances share the same Key Management Server (KMS), which provides encryption keys for both environments; and ensure that the VM is encrypted before attempting the migration, which allows preserving its encryption status during vMotion.
NEW QUESTION # 42
......
VMware 2V0-21.23 certification exam covers a wide range of topics, including vSphere networking, storage, security, virtual machines, and troubleshooting. 2V0-21.23 exam is intended for IT professionals with at least six months of experience in deploying and managing VMware vSphere solutions. Passing this certification exam demonstrates that an individual has the necessary skills and knowledge to manage and administer vSphere 8.x environments effectively. VMware vSphere 8.x Professional certification is highly valued in the industry and can lead to better job opportunities, higher salaries, and increased credibility as an IT professional.
100% Free VCP-DCV 2023 2V0-21.23 Dumps PDF Demo Cert Guide Cover: https://passleader.realexamfree.com/2V0-21.23-real-exam-dumps.html
