Pass Your HP Exam with HPE0-S59 Exam Dumps (Updated 81 Questions)
HPE0-S59 Exam Dumps - HP Practice Test Questions
NEW QUESTION # 45
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. virtual Volume
- B. Storage Container
- C. Virtual Volume Set
- D. App Volume Set
Answer: C
NEW QUESTION # 46
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Loop protection
- B. Storm control
- C. Pause flood protection
- D. LLDP tagging
Answer: B
NEW QUESTION # 47
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It is fully managed using HPE OneView including all connections
- B. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
- C. It is equipped with HPE Persistent memory by default
- D. It can support a single processor only and up to 4 per chassis
Answer: D
NEW QUESTION # 48
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At HPE OneView Interface to verify whether the server is In the maintenance mode
- B. At the iLO interface to verify whether the ILO Advanced license is properly applied
- C. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- D. At HPE OneView Interface to verify whether the iLO processor is disabled
Answer: C
Explanation:
When the iLO interface prompts for a login instead of automatically logging in via HPE OneView, a common issue is that the Single Sign-On (SSO) certificate might have been removed or is not properly configured on the iLO. Verifying the presence and validity of the SSO certificate on the iLO interface is a critical step in troubleshooting this issue.
NEW QUESTION # 49
What is a restriction of using a RoCE network?
- A. it is not supported with HPE Virtual Connect SE 40 GD F8 Module for HPE Synergy.
- B. It does not support smart link and private network features.
- C. It is by default configured as an untagged network and cannot be a part of a network set.
- D. It does not support Private VLAN and Multicast VLAN.
Answer: C
NEW QUESTION # 50
Your customer plans to deploy VMware vSAN using D3940 Storage Modules.
Which statement about this solution is true?
- A. To use the storage controller that will access D3940 storage modules, a second CPU must be installed.
- B. The 12Gb SAS modules required for D3940 connectivity can only be installed in the first fabric.
- C. All drives in the D3940 storage modules must formulate a single logical drive with RAID5 configured
- D. For VMware vSAN deployment, all drives in the D3940 storage modules must be SSD drives.
Answer: D
Explanation:
For VMware vSAN deployments, it is recommended that all drives in the D3940 storage modules be SSD drives to ensure optimal performance and efficiency. SSDs provide the necessary speed and reliability required by vSAN for handling storage-intensive operations and maintaining high performance.
NEW QUESTION # 51
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. Loop protection
- B. Storm control
- C. Pause flood protection
- D. LLDP tagging
Answer: B
Explanation:
Storm control is a feature in HPE Virtual Connect that allows administrators to suppress excessive inbound multicast, broadcast, and destination lookup failure (DLF) packets. This feature helps to mitigate the negative impact of network storms, which can degrade network performance and availability. By configuring storm control, administrators can set thresholds to limit the rate of such packets entering the network, ensuring a stable and reliable network environment.
NEW QUESTION # 52
Which statement about manual orchestration during the firmware update is true?
- A. It is supported only for logical enclosures with at least three frames
- B. It provides the ability to install an older firmware version than currently Installed In the interconnect
- C. It provides an ability to select and update one side of the Interconnect topology at a time
- D. It allows all the interconnect modules to be activated manually at the same time.
Answer: C
Explanation:
Manual orchestration during a firmware update allows administrators to control the update process more precisely. Specifically, it enables the selection and update of one side of the interconnect topology at a time.
This capability is particularly useful in maintaining network availabilityand minimizing downtime during the update process, as one side can be updated and verified before proceeding to the other side.
NEW QUESTION # 53
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. To use all compute nodes, the customer must create at least two logical enclosures
- B. The customer can add one D3940 storage Module to each of the frames
- C. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- D. To manage all frames, the customer must buy two additional HPE Composer 2 modules
Answer: C
NEW QUESTION # 54
What is one of me benefits of using HPE Composer 2?
- A. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- B. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
- C. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- D. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
Answer: B
Explanation:
One of the key benefits of using HPE Composer 2 is its enhanced scalability. A pair of HPE Composer 2 modules can manage up to 42 frames, which is double the capacity managed by the previous generation HPE Composer (which manages up to 21 frames). This increased capacity allows for more efficient and large-scale management of HPE Synergy environments.
NEW QUESTION # 55
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- B. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
- C. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- D. The customer can add a new logical enclosure to an existing setup once all required licenses are added to HPE OneView and associated with the new frames.
Answer: A
Explanation:
HPE Synergy management rings have a maximum capacity for the number of frames they can manage. With
18 frames already managed in 6 logical enclosures, adding 5 more frames would exceed this capacity.
Therefore, the customer needs to create a new management ring for the new logical enclosure to ensure proper management and operation.
NEW QUESTION # 56
Your customer wants to add a second HPE Synergy frame to an existing logical enclosure Based on a single HPE Synergy frame. The customer wants to use a highly available master setup.
Which procedures should De performed during the expansion process? (Select two.)
- A. Move one of the master modules to the appropriate interconnect bay in the second frame.
- B. Re-parent an existing enclosure group to the new logical interconnect group.
- C. Create a new logical interconnect group and enclosure group for two frames setup
- D. Modify an existing logical interconnect to include second HPE Synergy frame.
- E. Create a new logical enclosure based on both HPE Synergy frames.
Answer: A,D
Explanation:
To expand an existing logical enclosure based on a single HPE Synergy frame to include a second frame and ensure a highly available master setup, the following steps should be performed:
* Modify an existing logical interconnect to include the second HPE Synergy frame:This step involves updating the logical interconnect configuration to encompass the new frame, ensuring network connectivity and consistency across both frames.
* Move one of the master modules to the appropriate interconnect bay in the second frame:To achieve a highly available master setup, one of the master modules should be relocated to the second frame, providing redundancy and high availability for the management components.
NEW QUESTION # 57
Your customer plans to manage HPE Primera using HPE Oneview
Which storage management tasks can be completed using HPE OneView for this environment?
- A. CPG management
- B. Cache management
- C. Replication setup
- D. Volume provisioning
Answer: D
Explanation:
HPE OneView allows for several storage management tasks when managing HPE Primera, including volume provisioning. This task involves creating and managing storage volumes that can be allocated to compute nodes and applications within the environment. HPE OneView streamlines this process, providing a centralized management interface.
NEW QUESTION # 58
What is a limitation when creating a server profile?
- A. It is not possible to create shared volumes on demand through a server profile
- B. ILO management is limited to the integration with Active Directory or LDAP
- C. Administrator cannot define more than 8 connections within a server profile
- D. BIOS settings can be changed only when UEFI optimized is selected as boot mode
Answer: A
Explanation:
A limitation when creating a server profile in HPE OneView is that it is not possible to create shared volumes on demand directly through a server profile. Server profiles in HPE OneView are used to define and manage the configuration of compute nodes, including network connections, BIOS settings, and boot order, but they do not have the capability to dynamically create or manage shared storage volumes.
NEW QUESTION # 59
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If an compute nodes are added to the vCenter Server
- B. If HPE OneView credentials are added in vCenter Server
- C. If the HPE Oneview instance Is integrated with HPE OV4VC.
- D. If vCenter Server is licensed in the HPE Oneview interface
Answer: A
NEW QUESTION # 60
......
Pass Your HPE0-S59 Exam Easily with Accurate PDF Questions: https://passleader.realexamfree.com/HPE0-S59-real-exam-dumps.html
