Fortinet FCP_FAZ_AD-7.4 Dumps - The Sure Way To Pass Exam [Q31-Q46]

Fortinet FCP_FAZ_AD-7.4 Dumps - The Sure Way To Pass Exam

FCP_FAZ_AD-7.4 Exam Questions (Updated 2025) 100% Real Question Answers

NEW QUESTION # 31
What FortiView tool can you use to automatically build a dataset and chart based on a filtered search result?

• A. Export to Report Chart
• B. Dataset Library
• C. Chart Builder
• D. Custom View

Answer: A

NEW QUESTION # 32
Which two of the following must you configure on FortiAnalyzer to email a FortiAnalyzer report externally?
(Choose two.)

• A. Mail server
• B. SFTP server
• C. Output profile
• D. Report scheduling

Answer: A,C

Explanation:
Reference: https://docs.fortinet.com/document/fortianalyzer/6.0.2/administration-guide/598322/creating- output-profiles

NEW QUESTION # 33
Which two parameters impact the amount of reserved disk space required by FortiAnalyzer? (Choose two.)

• A. License type
• B. RAID level
• C. Total quota
• D. Disk size

Answer: B,D

Explanation:
Disk size - This is a fundamental parameter. The total disk size directly impacts how much space is available for storing logs, reports, and other data. A larger disk size means more space is available, which can influence the reserved space portion proportionally.
RAID level - The RAID (Redundant Array of Independent Disks) configuration used affects how disk space is utilized. Different RAID levels offer varying balances of performance, data availability, and storage capacity. For example, RAID 1 mirrors the entire contents of the disk, effectively halving the storage capacity for data protection, while RAID 5 uses striping with parity and offers better space efficiency but requires space for parity information.

NEW QUESTION # 34
On the RAID management page, the disk status is listed as Initializing.
What does the status Initializing indicate about what the FortiAnalyzer is currently doing?

• A. FortiAnalyzer is writing data to a newly added hard drive to restore it to an optimal state
• B. FortiAnalyzer is writing to all of its hard drives to make the array fault tolerant
• C. FortiAnalyzer is functioning normally
• D. FortiAnalyzer is ensuring that the parity data of a redundant drive is valid

Answer: B

Explanation:
Reference:
8977-00505692583a/FortiAnalyzer-5.6.10-Administration-Guide.pdf (40)

NEW QUESTION # 35
Refer to the exhibit.

The image displays "he configuration of a FortiAnalyzer the administrator wants to join to an existing HA cluster.
What can you conclude from the configuration displayed?

• A. This FortiAnalyzer will join to the existing HA cluster as the primary.
• B. After joining to the cluster, this FortiAnalyzer will keep an updated log database.
• C. This FortiAnalyzer is configured to receive logs in its port1.
• D. This FortiAnalyzer will trigger a failover after losing communication with its peers for 10 seconds.

Answer: B

Explanation:
Operation Mode: The mode is set to "High Availability" which indicates that this FortiAnalyzer is intended to be part of an HA cluster.
Preferred Role: The "Primary" role is selected, meaning this device is configured to act as the primary unit in the HA cluster. This is a crucial setting as it determines the device's behavior and responsibilities within the cluster.
Cluster Virtual IP: A specific IP address (192.168.101.222) is assigned to be used by devices in the network to communicate with the cluster. This Virtual IP will be shared between the units in the cluster.
Cluster Settings: These include configurations for heartbeat interval, failover threshold, and priority which are crucial for maintaining cluster health and managing failover scenarios.
Given these points, the correct conclusion from the options provided is:
C: This FortiAnalyzer will join the existing HA cluster as the primary.

NEW QUESTION # 36
A rogue administrator was accessing FortiAnalyzer without permission.
Where can you view the activities that the rogue administrator performed on FortiAnalyzer?

• A. Fabric View
• B. System Settings
• C. Log View
• D. FortiView

Answer: D

Explanation:
Log View in FortiAnalyzer records all logs related to system and user activities, including any changes made by administrators. It would show entries related to any unauthorized access or modifications done by a rogue administrator.

NEW QUESTION # 37
Which statement about the communication between FortiGate high availability (HA) clusters and FortiAnalyzer is true?

• A. The FortiGate HA cluster must be in active-passive mode in order to avoid conflict.
• B. FortiAnalyzer distinguishes each cluster member by the IP addresses in log message headers.
• C. If devices were registered to FortiAnalyzer before forming a cluster, you can manually add them together.
• D. If the HA primary device becomes unavailable, you must remove it from the HA cluster list on FortiAnalyzer.

Answer: B

Explanation:
This allows FortiAnalyzer to correctly identify and process logs from different members of the HA cluster.

NEW QUESTION # 38
Which items must you configure on FortiAnalyzer to send its reports to an external server?

• A. Report schedule
• B. Output profile
• C. Fabric connector
• D. Mail server

Answer: B

Explanation:
To send reports from FortiAnalyzer to an external server, you must configure the output profile. This involves specifying the method (FTP, SFTP, or SCP), server IP, username, password, and the directory where the report will be saved. Additionally, you have the option to delete the report after it has been uploaded to the server.
Reference: FortiAnalyzer 7.2 Administrator Guide, "Enable uploading of generated reports to a server" section.

NEW QUESTION # 39
Which two settings must you configure on FortiAnalyzer to allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group? (Choose two.)

• A. A local wildcard administrator account
• B. LDAP servers IP addresses added as trusted hosts
• C. An administrator group
• D. One or more remote LDAP servers

Answer: C,D

Explanation:
To allow non-local administrators to authenticate on FortiAnalyzer with any user account in a single LDAP group, you must configure one or more remote LDAP servers and an administrator group. First, you configure the LDAP server(s) by specifying the server name, IP, and other details such as the Common Name Identifier and Distinguished Name. Then, you add the LDAP server to a user group.
Finally, you create an administrator account that uses this user group for authentication, allowing any user from the specified LDAP group to authenticate.
Reference: FortiAnalyzer 7.2 Administrator Guide, "Configuring remote authentication for administrators using LDAP" section.

NEW QUESTION # 40
A play book contains five tasks in total. An administrator executed the playbook and four out of five tasks finished successfully, but one task failed. What will be the status of the playbook after its execution?

• A. Upstream_failed
• B. Success
• C. Running
• D. Failed

Answer: D

Explanation:
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor.
FortiAnalyzer_7.0_Study Guide page No: 247
Playbook jobs that include one or more failed tasks are labeled as Failed in Playbook Monitor. A failed status, however, does not mean that all tasks failed. Some individual actions may have been completed successfully.

NEW QUESTION # 41
Which statement is true regarding Macros on FortiAnalyzer?

• A. Macros are supported only on the FortiGate ADOM.
• B. Macros are useful in generating excel log files automatically based on the reports settings.
• C. Macros are predefined templates for reports and cannot be customized.
• D. Macros are ADOM specific and each ADOM will have unique macros relevant to that ADOM.

Answer: D

Explanation:
FortiAnalyzer_7.0_Study_Guide-Online.pdf page 283: Note that macros are ADOM-specific and supported in FortiGate and FortiCarrier ADOMs only.

NEW QUESTION # 42
Which fact must you consider after you enable auto-cache for reports?

• A. You must rebuild the SQL database for the change to take effect.
• B. You must choose a report type that supports this feature.
• C. Larger reports may consume excessive system resources.
• D. Generating multiple reports simultaneously may cause data corruption.

Answer: C

NEW QUESTION # 43
What FortiGate process caches logs when FortiAnalyzer is not reachable?

• A. logfiled
• B. oftpd
• C. sqlplugind
• D. miglogd

Answer: D

NEW QUESTION # 44
Refer to the exhibit.

The exhibit shows the creation of a new administrator on FortiAnalyzer.
What are two effects of enabling the choice Match all users on remote server when configuring a new administrator? (Choose two.)

• A. It allows user accounts in the LDAP server to use two-factor authentication.
• B. It creates a wildcard administrator using an LDAP server.
• C. Administrators can log in to FortiAnalyzer using their credentials on the remote LDAP server.
• D. User Remote-Admin from the LDAP server will be able to log in to FortiAnalyzer at any time.

Answer: B,C

Explanation:
Enabling this option allows any user authenticated by the LDAP server to log in to FortiAnalyzer, effectively creating a wildcard administrator.

NEW QUESTION # 45
What must you configure on FortiAnalyzer to upload a FortiAnalyzer report to a supported external server?
(Choose two.)

• A. Output profile
• B. Report scheduling
• C. Mail server
• D. SFTP, FTP, or SCP server

Answer: A,D

Explanation:
https://docs.fortinet.com/document/fortianalyzer/6.0.2/administration-guide/598322/creating-output-profiles

NEW QUESTION # 46
......

Fortinet FCP_FAZ_AD-7.4 Exam Syllabus Topics:

Topic	Details
Topic 1	System Configuration: This section assesses the capabilities of network and security analysts in managing FortiAnalyzer systems. It includes tasks like performing initial configurations, setting up high-availability systems, and configuring RAID for storage.
Topic 2	Device Management: Here, Fortinet network and security analysts are evaluated on their ability to handle devices linked to FortiAnalyzer. This includes adding new devices, managing them efficiently, and troubleshooting communication issues.
Topic 3	Logs and Reports Management: This part of the exam measures the candidate's ability to handle log data and generate reports using FortiAnalyzer. Network and security analysts must show proficiency in managing, analyzing, and reviewing logs to ensure effective system monitoring and auditing processes are in place.
Topic 4	Administration: This section evaluates the ability of network and security analysts to configure administrative access and manage Administrative Domains (ADOMs). It covers tasks such as setting user permissions, managing backups, and disk quotas, and ensuring secure and efficient management of administrative privileges within FortiAnalyzer systems.

 

Pass Fortinet FCP_FAZ_AD-7.4 Exam Quickly With RealExamFree: https://passleader.realexamfree.com/FCP_FAZ_AD-7.4-real-exam-dumps.html