C_HCMOD_03 100% Pass Guaranteed Download SAP Certified Application Associate Exam PDF Q&A
C_HCMOD_03 Practice Test Dumps with 100% Passing Guarantee
NEW QUESTION 27
At which levels of a project structure can you execute a deploy operation?Note: There are 2 correct answers to this question.
- A. Entire workspace
- B. Individual source file
- C. Sub-folder of a database module
- D. Individual container
Answer: A,C
NEW QUESTION 28
You combine two tables in a join node using multiple columns in each table.Why do you enable the dynamic join option? Note: There are 2 correct answers to this question.
- A. To ensure that the aggregation always happens after the join execution
- B. To force the calculation at the relevant level of granularity, even if this level is not the grouping level defined by the query
- C. To allow data analysis at different levels of granularity with the same calculation view
- D. To ensure that the join execution only uses the join columns requested in the query
Answer: C,D
NEW QUESTION 29
What are some best practices for writing SQLScript for use with calculation views? Note: There are 2 correct answers to this question.
- A. Break up large statements by using variables.
- B. Choose declarative language instead of imperative language.
- C. Use dynamic SQL.
- D. Control the flow logic using IF-THEN-ELSE conditions.
Answer: A,B
NEW QUESTION 30
What is generated when you deploy a CUBE calculation view design-time file?Note: There are 2 correct answers to this question.
- A. Metadata to enable consumption by external tools
- B. Cached results to improve read performance
- C. A column view in a container
- D. An SQL execution plan
Answer: A,B
NEW QUESTION 31
A calculation view includes a rank node that uses the source data and settings shown in the graphic.
Your query requests all columns of the rank node.How many rows are in the output of your query?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 32
You want to map an input parameter of calculation view A to an input parameter of calculation view B using the parameter mapping feature in the calculation view editor.
However, the input parameters of calculation view B are not proposed as source parameters. What might be the reason for this?
- A. You selected the wrong parameter mapping TYPE.
- B. The names of the input parameters do not match.
- C. Your source calculation view is of type DIMENSION.
- D. You already mapped the input parameters in another calculation view.
Answer: D
NEW QUESTION 33
You created a procedure to be consumed in an analytic privilege of the type DYNAMIC, but it isn't working as expected.What could be the reason?Note: There are 2 correct answers to this question.
- A. The procedure is write-enabled
- B. The output parameter is defined as NVARCHAR
- C. You defined more than one output parameter
- D. No input parameter is specified
Answer: C,D
NEW QUESTION 34
Which tool generates and executes the SQL for a specific node of your calculation view?
- A. Debug Query mode
- B. Explain plan
- C. SQL analyzer
- D. Database explorer
Answer: A
NEW QUESTION 35
Why do you use the Hidden Columns checkbox in the semantics node of your calculation view?Note:
There are 2 correct answers to this question.
- A. To ensure specific columns are NOT exposed to the reporting tool
- B. To prevent passing columns in stacked calculation views
- C. To remove a column that is also used as a Label column
- D. To avoid exposing sensitive columns when defining calculated columns
Answer: A,C
NEW QUESTION 36
You are managing your source files using Git. In which sequence does your file progress towards a COMMIT?
- A. Staging area -> Working directory -> Local Git repository
- B. Working directory -> Staging area -> Local Git repository
- C. Local Git repository -> Staging area -> Working directory
- D. Working directory -> Local Git repository -> Staging area
Answer: B
NEW QUESTION 37
Why would you use parameter mapping in a calculation view?Note: There are 2 correct answers to this question.
- A. To assign variables to one or more attributes
- B. To pass variable values to external value help views
- C. To push down filters to the lowest level calculation views
- D. To convert the data types of input parameters
Answer: B,C
NEW QUESTION 38
You combine two customer master data tables with a union node in a calculation view. Both master data tables include the same customer name.How do you ensure that each customer name appears only once in the results?
- A. Define a restricted column in a union node.
- B. Include an aggregation node above the union node.
- C. In the union node, map both source customer name columns to one target column.
- D. Add an intersect node above the union node.
Answer: D
NEW QUESTION 39
What are some best practices when developing calculation views? Note: There are 2 correct answers to this question.
- A. Include all data flow logic within one calculation view.
- B. Aggregate at the lowest possible node.
- C. Model star schemas using a sequence of join nodes.
- D. Avoid defining joins on calculated columns.
Answer: A,D
NEW QUESTION 40
You want to join two tables in a calculation view.Why do you use a non-equi join?
- A. Join columns need to be ignored when NOT requested by the query.
- B. Join columns have different data types.
- C. The join condition is not represented by matching values.
- D. The number of joined columns is different in each table.
Answer: C
NEW QUESTION 41
You created a table and inserted data in it using SQL statements inside the SAP HANA Deployment Infrastructure (HDI) container of your project. You add this table as a data source to a calculation view and try to deploy it.What do you observe in the SAP HANA database container?
- A. The deployment is successful and the data preview returns expected data.
- B. The deployment fails and the table is dropped.
- C. The deployment is successful but the data preview returns an error message.
- D. The deployment fails and the table is not dropped.
Answer: D
NEW QUESTION 42
Two calculation views, A and B, are defined as shown in the diagram. Three analytic privileges have been granted to you.
When you preview calculation view A, what data do you see?
- A. US for P1 and GE for P1
- B. US for P1 and P2, and GE for P1 and P2
- C. US for P1
- D. US for P1 and P2, and GE for P2
Answer: A
NEW QUESTION 43
Why would you choose an HDI-shared service plan instead of a schema service plan?Note: There are 3 correct answers to this question.
- A. You want to use SAP Business Application Studio.
- B. You want to use synonyms to access external data.
- C. You want to develop calculation views.
- D. You want to create database objects using source files.
- E. You want to use containers to isolate objects.
Answer: A,D,E
NEW QUESTION 44
You have imported a new calculation view in a folder that contains an .hdinamespace file. This calculation view consumes one data source, which is a table. When trying to deploy the calculation view, the deployment fails with a namespace-related issue.What could be the reason?Note: There are 2 correct answers to this question.
- A. The .hdinamespace specifies "sub-folder":"append", so calculation views can only be created in subfolders.
- B. The imported calculation view and its data source have different namespaces.
- C. An .hdinamespace file is defined in the SRC folder that specifies a different namespace property than the one in the identifier of the calculation view.
- D. The namespace used within the calculation view to reference the table is different from the actual namespace in the identifier of this table.
Answer: B,D
NEW QUESTION 45
Why would you set the "Ignore multiple outputs for filters" property in a calculation view?
- A. To ensure semantic correctness
- B. To hide columns that are not required
- C. To force filters to apply at the lowest node
- D. To avoid duplicate rows in the output
Answer: C
NEW QUESTION 46
What options do you have to handle orphan nodes in your hierarchy?Note: There are 2 correct answers to this question.
- A. Define an expression to determine a parent.
- B. Assign them to a node at the root level.
- C. Assign them to a level below the root.
- D. Generate additional root nodes.
Answer: C,D
NEW QUESTION 47
Using the table in the diagram, you need to create a CUBE calculation view.
What is the simplest approach to create the output shown in the screenshot?
- A. Implement a union node and map each country as a separate column.
- B. Create 3 calculated columns.
- C. Create a restricted column for each country.
- D. Create a filter expression that uses an OR operator.
Answer: C
NEW QUESTION 48
Which components are part of SAP HANA Cloud?Note: There are 2 correct answers to this question.
- A. SAP HANA database
- B. Data lake
- C. SAP Analytics Cloud
- D. SAP Enterprise Architecture Designer
Answer: A,B
NEW QUESTION 49
What are the advantages of column store tables compared to row store tables? Note: There are 3 correct answers to this question.
- A. Higher performance for query operations
- B. Higher data compression rates
- C. Additional indexes are used
- D. Parallel access is improved
- E. Improved write performance on frequent updates
Answer: A,B,D
NEW QUESTION 50
Which of the following data sources can you include in a graphical calculation view?Note: There are 2 correct answers to this question.
- A. Scalar function
- B. Procedure
- C. Row table
- D. Table function
Answer: C,D
NEW QUESTION 51
You create a table function to remove historic records, sum the current total weekly working hours for each employee, and update the personnel table with the results. The deployment of the table function fails.Which of the following could be a valid reason?
- A. Your function refers to a scalar function.
- B. You did NOT define a valid table type.
- C. You did not define at least one input parameter.
- D. Your function includes a TRUNCATE statement.
Answer: D
NEW QUESTION 52
......
C_HCMOD_03 PDF Dumps Are Helpful To produce Your Dreams Correct QA's: https://passleader.realexamfree.com/C_HCMOD_03-real-exam-dumps.html
