Accurate Hot Selling JN0-363 Exam Dumps 2023 Newly Released
Get 100% Authentic Juniper JN0-363 Dumps with Correct Answers
Juniper JN0-363 (Service Provider Routing and Switching, Specialist (JNCIS-SP)) certification is a globally recognized certification that is designed for IT professionals who specialize in service provider routing and switching technologies. It is particularly beneficial for network engineers, network support professionals, and service provider operations personnel who work with Juniper Networks routers and switches.
The JN0-363 exam covers a wide range of topics, including advanced routing protocols, MPLS, BGP, OSPF, and IS-IS, among others. JN0-363 exam also tests the candidate's ability to configure, troubleshoot, and manage Juniper's service provider routing and switching devices. The JN0-363 certification is a valuable asset for individuals who want to advance their careers in the networking industry, as it demonstrates their expertise in designing and implementing complex networks.
NEW QUESTION # 85
Click the Exhibit. You are receiving the same route prefix from four EBGP neighbors.
Based on the information provided in the exhibit, which route will be selected?
- A. Route 3
- B. Route 1
- C. Route 4
- D. Route 2
Answer: A
NEW QUESTION # 86
By default, which BGP attribute is only compared when two route advertisements are received from the same neighboring AS?
- A. MED
- B. AS-Path
- C. Next Hop
- D. Communities
Answer: A
NEW QUESTION # 87
Exhibit
You want the R1 and R3 routers to forward traffic destined to the 203.0.113.0/24 network through R2. Which BGP attribute would you modify to satisfy this requirement?
- A. local preference
- B. MED
- C. community
- D. origin
Answer: B
NEW QUESTION # 88
Which statement is true when using MVRP on MX Series devices?
- A. MVRP does not work with MSTP, RSTP, and VSTP
- B. MVRP works with MSTP and VSTP, but not RSTP
- C. MVRP works with RSTP and VSTP, but not MSTP
- D. MVRP works with MSTP and RSTP, but not VSTP
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/mvrp.html
NEW QUESTION # 89
Click the Exhibit.
Referring to the exhibit, which route(s) will be exported to neighbor 192.168.1.2?
- A. 100.0.20.1/32, 192.168.1.1/32, and 100.0.0.1/32
- B. 100.0.1/32 and 100.0.20.1/32
- C. 10.0.0.0/24, 11.0.0.0/24,100.0.0.1/32, 100.0.20.1/32, and 192.168.1.1/32
- D. 100.0.20.1/32
Answer: C
NEW QUESTION # 90
Referring to the exhibit, what will happen to untagged frames?
- A. The untagged frames are associated with VLAN 10.
- B. The untagged frames are associated with VLAN 20.
- C. The untagged frames are load balanced between VLAN 10 and VLAN 20.
- D. The untagged frames are dropped.
Answer: D
NEW QUESTION # 91
Click the Exhibit.
Referring to the exhibit, which IS-IS router will be selected as the DIS?
- A. Router 2
- B. Router 4
- C. Router 3
- D. Router 1
Answer: B
NEW QUESTION # 92
You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP-signaled LSPs in your MPLS network cannot be mapped.
Which configuration should be performed to accomplish this task?
- A. Configure the no-propagate-ttl parameter for each LSP on the egress device
- B. Configure the no-propagate-ttl parameter for each LSP on the ingress device
- C. Configure the no-decrement-ttl parameter for each LSP on the ingress device
- D. Configure the no-decrement-ttl parameter for each LSP on the egress device
Answer: A
NEW QUESTION # 93
You observe that VPN routes are hidden on your PE router Which situation accounts for these hidden routes?
- A. The protocol next-hop is not found in bgp I3vpn 0
- B. The protocol next-hop is not found in inet 2
- C. The protocol next-hop is not found in inet.3
- D. The protocol next-hop is not found in mpls 0
Answer: C
NEW QUESTION # 94
Click the Exhibit button. Given the OSPF network topology shown in the exhibit, you would like to inject external (non- OSPF) routes into the network on Router D
Which two OSPF area types will support this configuration? (Choose two)
- A. totally stubby area
- B. non-backbone area
- C. stub area
- D. not-so-stubby area
Answer: B,D
NEW QUESTION # 95
Click the Exhibit.
You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose two.)
- A. Remove the existing 192.168.2.0/30 static route.
- B. Add a specific route to the remote device's loopback address with the next-hop device defined as the next-hop gateway.
- C. Set the GRE interface with a larger TTL value.
- D. Add a specific static route to the local peer's network with the remote devices'loopback address as the next-hop gateway.
Answer: A,B
NEW QUESTION # 96
A customer pays for the bandwidth on a per-packet basis. The network administrator wants to constrain costs and prevent Layer 2 loops on a multihomed Layer 2 WAN network.
Which technology would satisfy these requirements?
- A. Rapid Spanning Tree Protocol
- B. MPLS over GRE
- C. Loop protection
- D. Multiple Spanning Tree Protocol
Answer: C
NEW QUESTION # 97
Exhibit
Which prefix in the output shown in the exhibit is an external prefix injected by an OSPF router?
- A. 172.26.4.0730
- B. 192.108.1.4
- C. 172.18.1.0/24
- D. 192.168.1.3
Answer: A
NEW QUESTION # 98
Which two problems occur when increasing numbers of users are added to an Ethernet LAN with no switches present? (Choose two.)
- A. The MAC table sizes increase
- B. There is unnecessary consumption of network bandwidth
- C. Some devices will not see certain traffic
- D. There is a greater chance for collisions to occur
Answer: B,D
NEW QUESTION # 99
Click the Exhibit.
You have just configured a GRE tunnel, but you notice that the GRE tunnel is flapping.
Referring to the exhibit, which two would you take to solve this problem? (Choose two.)
- A. Remove the existing 192.168.2.0/30 static route.
- B. Add a specific route to the remote device's loopback address with the next-hop device defined as the next-hop gateway.
- C. Set the GRE interface with a larger TTL value.
- D. Add a specific static route to the local peer's network with the remote devices'loopback address as the next-hop gateway.
Answer: A,B
NEW QUESTION # 100
Click the Exhibit button.
In the network shown in the exhibit, all switches are configured with the default STP root bridge priority, and Switch A has been selected as root. You recently added the older Switch D into the network as an access switch, and notice it has taken over as root.
Which configuration would solve this problem?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/no-root-port-edit-protocols-stp.html
NEW QUESTION # 101
Which statement about a virtual-router type of routing instance is correct?
- A. It is used to create and maintain separate routing and forwarding tables
- B. It is used in Layer 3 VPN implementations
- C. It is the only routing instance type supported on Junos devices
- D. It is used to separate large networks into smaller administrative entities
Answer: A
NEW QUESTION # 102
You are logged into a PE router participating in a Layer 3 VPN as defined in RFC 4364. You would like to ping the remotely connected CE router's loopback address. The address of the loopback is 122.161.2.1, the VPN routing-instance is called VPN-C.Which command will accomplish this goal?
- A. ping routing-instance VPN-C 122.161.2.1
- B. ping VPN-C 122.161.2.1
- C. ping instance VPN-C 122.161.2.1
- D. ping vpn-instance VPN-C 122.161.2.1
Answer: A
NEW QUESTION # 103
Click the Exhibit button. In the exhibit, three IPv6 addresses are listed. Which two statements are true? (Choose two.)
- A. The first address is complete and correct.
- B. The third address is not formatted correctly.
- C. The second address is incomplete and not correct.
- D. All three addresses are the same.
Answer: A,D
NEW QUESTION # 104
Click the Exhibit button. After the MAC learning limit of 3000 is reached for the bd bridge domain as shown in the exhibit, what happens to frames that arrive that contain unknown unicast destination addresses?
- A. The are forwarded to the default gateway.
- B. They are flooded.
- C. They are forwarded to the IRB interface.
- D. They are dropped.
Answer: B
NEW QUESTION # 105
Which statement is correct about the FE80;:/10 prefix?
- A. This prefix range is reserved for multicast applications
- B. This prefix range is used for the link local address.
- C. This prefix range is used on the loopback interface.
- D. This prefix range is not reserved.
Answer: B
NEW QUESTION # 106
......
Dumps of JN0-363 Cover all the requirements of the Real Exam: https://passleader.realexamfree.com/JN0-363-real-exam-dumps.html
